Stainless Steel Cabling Systems Hardware & Accessories Stainless Steel Cable Systems :: Components & Accessories Timber Post Cable System :: Timber Applications Stainless Steel Post Cable System :: Steel Applications Installation & DIY Quote & Orders
Australian Designed & Manufactured GLOBALLY PATENTED
Compliant with AS1657 Standards
and all amendments.

Certified to meet all BCA
(Building Codes of Australia) Requirements
FAQ > frequently asked questions & regulations

Is this system made from 316 (marine) grade stainless steel?
Yes, all our systems are made of 316 grade stainless steel.

Can I install this sytem myself?
Yes, all our systems have been designed for easy installation.

What tools will I require to install these systems?
For metal posts you would only require the stainless steel spanner set (set of three). For timber posts a counter bore bit, Phillips drive bit and stainless steel spanner set, all of which are available to purchase. Note: tool kiit is only required once.

What type and size of whire can I use?
We recommend 1 X 19 strand, 3.2mm, 316 grade stainless steel only as it has the least amount of flex and is more durable.

What are the spacings between cables?
For Australia, if your deck is more than one metre and less than four metres off the ground you will require cable spacings of 80mm which equates to 11 cables. For decks that are more than four metres off the ground you would have to run the cable vertically.

Can I run this system vertically?

Can I run cable around corners?
NO. Cable of 1 X 19 strand can NOT be run around corners. Whenever there is a change in angles you have to change the fittings.

Can I run cable through intermediate posts?
Yes, as long as it is in a straight run. If the cable comes to you already swaged to the swage studs you will require for metal posts a 8.5mm hole with the use of a grommet and a 10mm hole for timber posts. Once again, grommets are used to seal the hole in the timber and keep moisture out.

How do I obtain a quote or order?
If the system comes as a finished product (cables attached to the swage studs) we require face to face measurements in any straight run. For stairs we will require to be notified as the cut on the cable is different to that on a straight run.

What will it cost for freight?
Freight varies depending on location. Please put destination when obtaining a quote and it will appear on the quotation.

How long will my order take?
Stainless Cabling Systems delivers straight to your door. Orders are dispatched within 1 to 5 working days (dependant on location) from time of order placement.

I have a Question
If you have any Queries at all you can CALL US +61 2 9833 4033 or Email us by clicking here.